Product 01
Self-Laminating Wrap-Around Labels
A printed panel plus a clear tail that wraps over the print and seals it under a protective film — durable, long-term identification for terminated cable.
What it is
A self-laminating wrap-around label pairs a printable panel — usually opaque white — with a longer clear tail. You print the panel, wrap the label around the cable, and the clear tail laminates over the printed area, sealing your text beneath a transparent protective film.
Once applied, the label spins freely around the cable jacket, so it stays in place without restricting movement during installation or service.
How it works
- 01
Clean
Wipe the cable jacket with isopropyl alcohol so the adhesive bonds cleanly.
- 02
Peel
Remove the label from the liner without touching the adhesive face.
- 03
Apply
Position the printed panel against the cable at the marking point.
- 04
Wrap
Wind the clear tail fully around so it over-laminates the print and seals it.
Why choose it
- The over-laminate protects the print from abrasion, dirt, oils, solvents, water, and repeated handling.
- Strong long-term durability suits terminated cable, fixed installations, and longer-lasting or outdoor runs.
- The printed area stays legible for the service life of the cable, not just the first inspection.
Materials
- Self-laminating vinyl — highly conformable and self-extinguishing; a strong general-purpose choice.
- Polyester (PET) — wider temperature range with chemical and UV resistance for more demanding service.
- Permanent acrylic adhesive with water and oil resistance as the workhorse bond.
Specifications
Product-specific figures shown as [FILL] are confirmed from the technical data sheet.
| Material | Self-laminating vinyl or polyester (PET) |
|---|---|
| Adhesive | Permanent acrylic (oil/water resistant) |
| Service temperature (PET, typical) | approx. −40 °C to +150 °C (−40 °F to 302 °F) |
| Cable OD / AWG range | [FILL FROM TDS — by part number] |
| Standards | UL 2238 recognition, RoHS — [FILL FROM CERTIFICATE/TDS] |
| Print methods | Thermal-transfer (ribbon), laser, inkjet |
Applications
Customization
- Material, size, and clear-tail length matched to your cable diameter range
- Panel color and print method to suit your line
- Supplied as printer-ready blanks or as finished custom-printed parts
Printer compatibility
- Thermal-transfer — durable, smudge-resistant marks (ribbon required)
- Laser — sharp, toner-fused text for office and lab printers
- Inkjet — flexible short-run and variable-data printing
FAQ
Will the printed text rub off over time?
The clear tail over-laminates the print, so the marking sits under a protective film rather than on an exposed surface. That is the core reason to choose this format for long-term or harsh-handling installs.
Can I print these on my own thermal-transfer printer?
Yes. We supply printer-ready blanks sized to your cable range, and we can also deliver finished custom-printed parts if you prefer not to print in-house.
How do I pick the right size?
Sizing follows cable outer diameter (or AWG). Share your range on the quote form and we will recommend a part, or see our AWG sizing guide.
Get a no-obligation engineering quote
Tell us the cable, the environment, and the spec to meet. We will advise on material, format, and printing, and quote a custom solution or samples.